How To Fix DNS Server Windows 10 Error-Simple Guide

Though Windows is an impeccable Operating System, some issues always affect its performance. DNS Server Windows 10 Error is one of them. All on a sudden, the network does not connect and sites do not open. Moreover, the trouble does not resolve even after changing the adapter settings. It appears out of nowhere and the reasons are endless. However, there are some quick fixes that you can apply. Therefore, read this article on how to fix DNS server Windows 10 and resolve the trouble single-handedly.

Symptoms Behind DNS Server Error In Windows 10

Before we analyze the reasons behind this error code, let us discuss what is DNS. In short, Domain Name System is the unique code that connects the server with the site. But certain glitches can lead to troubles as discussed herein. Now, let us glance through some of the symptoms that are discussed below:

• Suddenly, the active window does not work.
• At times the page turns black
• A notification appears under the troubleshooting section
• Refreshing the page does not work
• In worst cases, the active window responds slowly to  mouse clicks or freezes for few seconds

The symptoms are important for effective solutions. Therefore, do not overlook them.

How To Fix DNS Server Windows 10: Potential Reasons

The symptoms can arise out of multiple reasons. One of them can be a power failure. Incorrect server address can also result in this glitch. Apart from that, there can be other issues.

• Issues with the router.
• The router settings are not configured with the respective computer or laptop
• There can be a misconfiguration in the DNS server address
• There can be malware attack that can crash the internet source temporarily
• An issue with the IP address is likely to interfere with the server connection
• Similarly, an error message will appear if there are physical glitches with the router itself Whatever be the reason, it is necessary to fix before further trouble occurs.

 Solution 1: Using The Control Panel Button

Before you begin with the solutions, check the router settings. You can also move to the adapter settings of your computer and check the open network. In case, you are using the command prompt function, follow the simple procedure.

• Click the Windows Key (present on the last row beside the Alt button) and R at the same time. Then move directly to the Run option and select the Open bar
• On that space, type Control and click on OK option. This will take you to a fresh page that has all the network sharing options.
• Next,  scroll your mouse to the Network sharing space and open the page
• Move to the left side of the screen and tap on Adapters. Just after selection, two options will appear. Go for the first one.
• Click on that Local Area Connection button. Right click on your mouse and move to Properties
• Once you click on it, endless connection suggestions will appear. Choose only Internet Protocol Version. Once you tap that key, ‘Properties’ will appear. Click on it and the General Internet Protocol Page will appear
• Select the IP and DNS Server address automatically one after the other and move to the OK key.

If this does not work, move on to the next solution

Solution 2: Applying Windows Update

At first, tap on the Home button and move directly to the control panel. You will find the option of Settings there. Tap on that key to open the Security tab. You will land on a fresh page.
Then, tap on the Advanced key to see the updates needed for the Windows panel.
As a user, you can also check for alternatives. You must select the procedure in which you want the upgradation process to work.  We suggest you to choose the first choice. Next, connect your PC with the local network ( press the button). Make sure you turn off the Update option present therein.
Finally, move back to the Settings and check whether the trouble is resolved.

Solution 3: The Power Settings

At times this glitch can be resolved through modifications in the power settings. Follow the steps for continuing the process.

• First, simultaneously tap on Windows option and S. Now choose the Power Option and a menu will appear.
• Now hover your mouse over the power plan and tap on the Plan settings. You can modify the segment according to your wish
• Tap on the key to open the Advanced settings.
• Finally, open the settings for Wireless Adapter ( on the left of the screen)
• Select Maximum Performance to Apply the changes. Do not overlook the OK button below the bar. You need to press it for finishing the process.

Solution 4: Update Drivers for Better Performance

Reinstalling network adapters can heal DNS server not responding error in Windows. To start with, press the Windows key (present on the left last row) and X concurrently. A menu will appear. Choose the Device Manager column. Now choose the network adapter and tap on the Uninstall key. Once the key is tapped, search the button which scans the hardware. This procedure will take few seconds so have patience.
Then, right-click on your network adapter and select the button to update the driver software.
Simultaneously, select the first box that appears in your  Network Controller. Now, relax until the procedure is over. You can restart your PC and check if you can access the internet.

As an alternative, you can enable the LLDP protocol. Just like the above solution, move to the Network Connections by tapping on Windows key and R  simultaneously.  The option comes right after Device Manager. Right click on the mouse and open the Ethernet bar. Choose the Properties option. Search for LLDP Driver Software and finish the process using the OK key.

Alternative Method

Check the router to stay connected to the internet. In case there is a sign of wear and tear, change the router. Otherwise, change the router settings. If it supports 5GHz select it. Otherwise, tap on 2.4GHz. You can also check for the further information from the manual present.

Solution 5: Performing Reboot Procedures

As a final resort, performing the clean reboot can help to eliminate the glitch. Follow the simple steps to continue with the process.

• Simultaneously tap the Windows key and R button. On the space available, type ‘msconfig’ and tap on OK. This will take you to the System Configuration page.
• Next, hover your mouse to the end of the page and tap on the Hide button present on your left. At the same time, move to the right and Choose the Disable all option.
• Select the ‘Apply’ button and finish the process using the OK key.
• Finally, restart your computer to see the changes

These are some other methods that can help you to resolve the DNS server glitch. But these were the best from the lot. Hope this article was helpful to solve your doubts regarding how to fix DNS server Windows 10.