Home » Data Recovery » How Do I Enable SSD in BIOS? Top Reasons and Solutions

How Do I Enable SSD in BIOS? Top Reasons and Solutions

Published By Nilesh
Aswin Vijayan
Approved By Aswin Vijayan
Published On January 17th, 2024
Reading Time 6 Minutes Reading

Have you ever experienced an instance wherein your SSD (solid state drive) is not detected in BIOS? This is because of its few configuration failures during the installation process. Are you among those users who need to enable SSD in BIOS? Then, we have good news for you. Considering the demanding queries to check SSD in BIOS, we have come up with this post. In this article, we will focus on the reasons why BIOS fails to recognize SSD along with the reliable solutions.

Navigation GuideHide

What is a BIOS?

Before enabling SSD in BIOS,. Let’s understand what BIOS is all about. It is system software that is embedded inside the computer. It enables the computer to start up and also helps in setting up most of the hardware peripherals. The basic function of the BIOS is to identify, initialize and test system devices like hard disk, USB, video display cards, etc. It can be accessed when the system is turned on. Moreover, it only requires the push of a function key, like F1, F2 or F10, to access it.

Let’s Follow a Scenario,

“While loading BF4 on my system, suddenly my system crashed. Ever since then, I have been unable to use my SSD as a boot drive. After the crash occurred, the BIOS is not detecting my SSD now. It is not showing up as a boot option. So, let me know: how do I get my SSD to show up in BIOS?? now? Kindly revert back at the earliest.”

“Due to some requirements, I am in the process of replacing my old HDD with an SSD. Now, I am only going to use SSD; hence, I have bought a Win10 CD to use it. Here, I am a little confused about what I need to change in the BIOS to setup the new SSD. Could someone explain the procedure to enable an SSD in BIOS?”

Major Reasons Why BIOS Fails to Detect the Solid State Drive

There can be several reasons why the BIOS is unable to recognize the SSD. The following are some of the major reasons:

  1. When the drive is not enabled in the BIOS: After the system is turned on, it will ask you to enter the System Setup/System BIOS. Without which, a user cannot check SSD in BIOS
  2. Improper installation of SATA drivers: While installing the older version of Windows, sometimes the drive is not detected. For that, update the driver for the computer storage controller
  3. Unplugged or defective data cable: Replace the cable if there are folding, crimping, or creasing data cables. This can cause BIOS to not detect the drive, hence failing to detect SSD in BIOS.
  4. Imperfect solid-state drive: Even after properly checking the above causes, if the drive is still not detected,. This can be due to a faulty or corrupted drive, which can be fixed using the software.

How Do I Enable SSD in BIOS Manually?

Follow these steps to accomplish this:

Solution 1: Detect the SSD in the BIOS

In most cases, the SSD is automatically detected by the BIOS. In some cases, it displays the drive model number. Whereas, in other case, it only indicates the existence of a drive and its capacity.

Solution 2: Enable the SATA Port

Now, to find new SSD in BIOS, the drive needs to first be detected. Once you realize that the drive is not detected, it may be because it has been turned off in the system setup. After adding the drive to the system, make sure to enable the port simply by turning it on in System Setup.

To enable the SSD in BIOS, one needs to enable the drive to be in ON mode, as given in the below screenshot.

Solution 3: Complications in Cables and Connections

In order to enable SSD in BIOS, a damaged SATA cable or connection can cause the BIOS to not detect the drive. There can be problems with the SATA connections because they are quite fragile and gentle to handle.

Therefore, try to check the cable by re-plugging it into the system and the drive. If the problem still persists, try to replace it with another cable. This will help detect the drive, thereby enabling SSD in BIOS.

During the process of enabling the SSD in BIOS, your valuable data got accidentally deleted from the SSD. Then, try to recover deleted data from NVMe/ M.2 SSD using some reliable professional tool.

Use SSD Recovery Software to Recover the Lost Data

There can be an instance wherein a user corrupts or formats the drive while enabling SSD in BIOS. Therefore, to resolve all these issues, one can use the utility. It is a smart and trustworthy Solid State Drive Data Recovery Tool that is capable of retrieving files from SSD drives without losing any information.

Download Now Purchase Now

If the above-discussed solutions are not properly followed, then it can lead to serious issues like corrupting the drive. This situation can be overcome by using this highly equipped tool, which can recover files from SSD hard drive with a few simple clicks.

Quick Working Steps of this Software

1: Download and install the SSD Recovery tool on your Windows.

SSD Recovery tool
2: Select the SSD recovery optionscan and format scan.

SSD recovery Scan option
3: A preview of recovered data files from the SSD.

recovered data files from the SSD

4: Save the recovered data anywhere on your computer.

recovered data anywhere

Wrapping Up

Sometimes users fail to enable SSD in BIOS. This situation occurs when the BIOS does not recognize the SSD. This blog has mentioned the top solutions to detect new SSD in BIOS. If, in that case, the SSD gets corrupted due to technical dubiousness or following the incorrect steps,. The corrupted SSD can be recovered with formatted data from HP laptop by using software, which is the most trusted software used by users to recover the corrupted files from the SSD.